Delta TE-4000 Manuel d'utilisateur télécharger pdf (Page 26)

Setting up the In-Line network in detail

To set up the in-line network you must install the I/O PB-17 boards

into each terminal.

There are 2 types of In-line network selectable via a selector

switch, which can be found on the underside of the cash register

Selector switch position 1 = Casio In-Line (ARCNET)

Selector switch position 2 = Cat-5A Cable

Initialise the first terminal and the machine number will be

MC#01connect the Casio or Cat-5 cable to the white Casio

connector or the OUT port of Cat-5 board.

In-line cable

Master

Add the second cash register and plug the In-line cable into the

white Casio connector or the IN port of the Cat-5 board

Initialise the cash register and check that the terminal has been

recognised in the In-line network by checking that the MC# number

is MC#02

In-line

Master Satellite

Add the third cash register to the network and plug the In-line

cable into the white Casio connector or the OUT port of machine 2

to the IN port of the Cat-5 board.

Initialise the cash register and check that the terminal has been

recognised in the In-line network by checking that the MC# number

is MC#03

Copy the above for machine 4 looking for MC#04 after initialisation

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 54 55

Pas de commentaire

Delta TE-4000 Manuel d'utilisateur Page 26