Delta 78-960 Manuel d'utilisateur

1INSTRUCTION MANUAL T-SQUARE® 10” OVERARM BLADEGUARD SYSTEM DATED 02-15-01

1022. Left to right movement of the blade guard basket (E) Fig 26, is obtained by loosening locking knob(F) and turning adjusting lever (G) clockwis

11Fig. 29Fig. 3025.To raise the guard basket (E) Fig. 29, above the saw blade, simply lift up knob (M) until pin (N)engages with hole (O) on vertical

12Delta maintains amodern, efficient PartsDistribution Center,located in Jackson,Tennessee.Highly qualified andexperienced CustomerService Representat

2INTRODUCTIONSAFETY RULES1. FOR YOUR OWN SAFETY, READ INSTRUCTIONMANUAL BEFORE OPERATING THE BLADE GUARDSYSTEM. Learn its application and limitations

3UNPACKINGCarefully unpack the blade guard and all loose items from the carton. Figures 2, 3, and 4 illustrate all items withthe Blade Guard System.1

4 9 - Splitter10 - 1/4-20 x 5/8” button head screws (2)11 - 1/4” bushing (2)12 - Stud13 - 5/16-18 x 5/8” button screws (2)14 - 5/16” bushi

54. Fasten the mounting bracket (A) Fig. 7, to the back rail (B)using the three 2-3/4” long hex head screws (F); three 3-3/4”long hex head screws (G);

68. Locate the components shown in Fig. 11, for the split-ter assembly.A. SplitterB. 1/4-20 x 5/8” button head screws (2)C. 1/4” Bushings (2)D. StudE

712. Loosely assemble plate (H) Fig. 15, knob (J), spring(K), flat washer (L) and E-ring (M) onto stud (D) as shownassembled in Fig. 16.13. Locate tw

817. Using a straight edge (S) Fig. 19, align the top portion ofsplitter mounting bracket (G) to saw arbor (T) as shown.Then tighten two screws (E)

9Fig.2320. Insert mounting bracket (B) Fig. 23. of the blade guard basket assemblyinto the “T” of the adjusting arm (K).Fig. 2421. Loosen the two lock