Delta A15098 Manuel d'instructions télécharger pdf (Page 10)

8. Place the intake funnel assembly (A) on the lower

support tube (B) Fig. 14. Secure it with a tube clamp

(C).

Fig. 14

ATTACHING THE VACUUM HOSE TO THE DUST COLLECTOR

1. Place the intake cap holder (D) on the dust collector

(Fig. 15).

NOTE: Do not cover the intake port with the intake cap

when attaching the hose to the intake port.

2. Place a hose clamp (A) Fig. 15 on the end of the

vacuum hose (B). Slide the hose around the intake

port (see the inset). Tighten the hose clamp (A).

Fig. 15

Disconnect the machine from the power source!

3. Place the remaining hose clamp (A) Fig. 16 around the other end of the hose (B). Slide the hose (B) on the intake

funnel (C). Tighten the hose clamp (A).

NOTE: If desired, the intake funnel (C) can be rotated to the vertical position (Fig. 17).

Fig. 16

Fig. 17

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Pas de commentaire

Delta A15098 Manuel d'instructions Page 10