Delta AH500 series Manuel télécharger pdf (Page 14)

Chapter 2 Programming

6. Analog input/output module (6 channels)

AH06XA-5A x 1

ERROR

RUN

10V, 20mA

10V,0/4~20mA

COM

06XA

2.1.2

Software

The software needed in the example is as follows.

z ISPSoft version 2.0 or above

z COMMGR version 1.0 or above

2.1.3

Tools and Materials

The tools and the materials need in the example are as follows.

z A personal computer in which the software mentioned above is installed

z A 100~240 V AC and 50/60 Hz power supply socket

z A 24 V DC power supply

z A cable

z A screwdriver

z An USB cable or a network cable (If users want to connect the Ethernet port or the COM port

(RS-232/RS-485) on the CPU module to the computer, they can refer to section 2.3.2 in

ISPSoft User Manual for more information. If users want to know more about installing the

USB driver, they can refer to appendix A in AH500 Operation Manual.)

z If necessary, users can prepare the accessories such as a switch and a bulb (to simulate the

activity of the external equipment).

2.2

Installation

2.2.1

Installing Modules

Please install the modules on the main backplane, as illustrated below.

Connect the module to the connector on the backplane, make sure that the module is installed on

the backplane properly, and tighen the the screw.

2-3

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 60 61

Pas de commentaire

Delta AH500 series Manuel Page 14