Delta MS210 Manuel d'instructions télécharger pdf (Page 12)

Fig. 24D

Fig. 24C

Fig. 24F

Fig. 24E

Fig. 23

AUXILIARY WOOD FENCE

When performing multiple or repetitive cut-off

operations that result in small cut-off pieces, one inch

or less, it is possible for the saw blade to catch the cut-off pieces

and project them out of the machine or into the blade guard and

housing, possibly causing damage or injury. To limit the possibility

of personal injury or blade guard damage, an auxiliary wood fence

can be mounted to your saw.

Holes are provided in the fence to attach an auxiliary fence (A) Fig.

23. This auxiliary fence is constructed of straight wood

approximately 1/2" thick by 3" high by 20" long.

1. Your machine has the capacity to cut standard 2 x 4’s lying flat or on edge, at the 45 degree right and left miter angles

(Figs. 24A and 24B).

2. A standard 2 x 6 can be cut in the 90 degree straight cut-off position in one pass (Fig. 24C) or at 45 degree right

or left miter angles (Figs. 24C and 24D).

3. Cutting a standard 4 x 4 can be accomplished with one pass (Fig. 24E).

4. Cutting various sizes of plastic pipe is an easy job with this machine (Fig. 24F).

Fig. 24A

Fig. 24B

GENERAL CUTTING OPERATIONS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Delta MS210 Manuel d'instructions Page 12