Delta Embedded DVR Manuel d'utilisateur télécharger pdf (Page 35)

Important

If the HDD amount is less than four, you do not need to install the HDD bracket.

When there is a bracket, please make sure the installation direction of HDDs is the same.

3.3.2 4 HDD Series

This series DVR max supports 4 SATA HDDs. Please use HDD of 7200rpm or higher. It has no

requirement for HDD capacity.

You can refer to the appendix for recommended HDD brand.

Please follow the instructions below to install hard disk.

After completing HDD installation, please check connection of data ribbon and power cord.

3.4 Rack Installation

7. Unfasten the HDD power

cable.

9. Use the special data cable to

connect the HDD and the SATA

port. Close the chassis and fix

the screws to secure firmly.

8. Insert the HDD power

cable.

1. Loosen the screws of the

er cover.

2. Line up the HDD to the four

holes of the HDD bracket.

3. Use four screws to fix HDD.

4. Unfasten the HDD power

cable.

5. Use the special data cable to

connect the HDD and the SATA

port

6. Insert the HDD power cable.

Close the chassis and fix the

screws to secure firmly.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 161 162

Pas de commentaire

Delta Embedded DVR Manuel d'utilisateur Page 35