Delta PG-40 Manuel d'installation télécharger pdf (Page 24)

Delta 1200 Technical Manual 07610-003-62-15 G

Issued: 10-27-2008 Revised:05-21-2012

SECTION 5: SERVICE PROCEDURES

REPLACING THE CHEMICAL FEEDER PUMP MOTOR (CONTINUED)

14. Place the roller and the rubber tube back in the pump cas-

ing. Place the pump cover back on and tighten down with the

four screws you previously removed.

15. Reattach the power wire and the wire for the priming

switch.

16. Put the cover back on the control box and secure with the

two screws previously removed.

17. Ensuring that all non-essential personnel are clear of the

area, restore power to the unit. Turn the unit on and by using

the priming switch, verify that the feeder pump operates and

pumps fluid.

18. Replace the front door.

AFTER MAINTENANCE ACTIONS

None.

SPECIAL NOTES

Work performed on Jackson dishmachines by unau-

thorized or unqualified personnel may void the warranty.

Before beginning this or any other maintenance evolution on a

unit under warranty, you should contact a certified Jackson

technician or Jackson Technical Service. You can find a list of

qualified service agencies in the back of you unit’s installation

manual.

SPECIAL PARTS

Removing the motor mounting screws.

Removing the motor.

Removing the roller.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Pas de commentaire

Delta PG-40 Manuel d'installation Page 24