Delta PG-40 Spécifications télécharger pdf (Page 44)

VFD-B Series

5-9

JOG

Decel

Time

Frequency

01-14

JOG

Freq.

JOG

Accel

Time

01-13

01 - 15

Auto-Acceleration / Deceleration

Factory Setting: 00

Settings 00 Linear acceleration / deceleration

01 Auto acceleration, linear Deceleration.

02 Linear acceleration, auto Deceleration.

03 Auto acceleration / deceleration

04 Auto acceleration / deceleration (refer to Accel/Decel Time

setting)



If this parameter is set to 03, the AC drive will accel/decel in the fastest and smoothest

means possible by automatically adjusting the time of accel/decel.



If this parameter is set to 04, the real accel/decel time will be equal to or more than

parameter Pr.01-09 ~Pr.01-12 and Pr.01-18 to Pr.01-21.

01 - 16

Acceleration S-Curve Factory Setting: 00

01 - 17

Deceleration S-Curve Factory Setting: 00

Settings 00 to 07



This parameter is used to ensure a smooth acceleration and deceleration. The S-curve

is enabled when sets at 01-07. Setting 1 offers the quickest S-curve and 07 offers the

longest and smoothest S-curve. The AC drive will not follow Accel/Decel Time in

Pr.01-09 to Pr.01-12. To Disable the S-curve, set Pr.01-16 and Pr.01-17 to 00.

NOTE: From the diagram shown below, the original setting Accel/Decel Time will be for

reference when the function of the S-curve is enabled. The actual Accel/Decel Time will be

determined based on the S-curve selected (01 to 07).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 178 179

Pas de commentaire

Delta PG-40 Spécifications Page 44