Delta CL180BN Manuel d'instructions télécharger pdf (Page 14)

TROUBLESHOOTING

For assistance with your tool, visit our website at www.deltamachinery.com

for a list of service centers or call the Delta Machinery help line at 1-800-223-

7278.

5. Slowly depress the nailer trigger (B) Fig. 10, to retract the driver blade,

but do not let the tool fully cycle. The spotting window (C) Fig. 11, can

be used to determine the position of the driver blade. When the front

end of the driver blade passes out of view, release the trigger.

REMOVE BATTERY

PACK FROM TOOL. THIS WILL

PREVENT ACCIDENTAL ACTUATION

WHILE THE JAM IS BEING CLEARED.

6. Remove the two hex screws (D) Fig.

11, and protector plate (F).

7. Remove jammed nails with a small

screwdriver or needle nosed pliers.

8. Replace the battery pack.

9. Release tension on drive spring by “dry” firing nailer into scrap wood.

10. The nailer is now ready for normal operation.

Fig. 11

1 2 ... 9 10 11 12 13 14 15 16 17

Pas de commentaire

Delta CL180BN Manuel d'instructions Page 14