Delta SA180 Instructions d'exploitation télécharger pdf (Page 8)

Fig. 1A Fig. 1B

Fig. 1A Sander Parts

1. Belt Assembly

2. Motor, Belt, and Base

3. Disc Table

4. Belt Table

5. Inside Pulley Guard

6. Upper Disc Guard

7. Lower Disc Guard

8. Clamp Handles

9. Disc Plate

10. Sanding Disc

11. 8mm Allen Wrench

12. 2.5mm Allen Wrench

13. Miter Gage

14. Dust Chute

Fig. 1B Hardware

1. M10x1.5x20mm Hex Socket Head Screw (2)

2. M6x1x15mm Cheese Head Screw (1)

3. M4x.07x45mm Cheese Head Screw (1)

4. M4x.07x10mm Cheese Head Screw (5)

5. 10mm Flat Washer (4)

6. 10mm Lockwasher (2)

7. 3/16" Flat Washer (2)

8. 6.4mm Internal Tooth Lockwasher (1)

9. M4x.07 Wing Nut (1)

CARTON CONTENTS

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Pas de commentaire

Delta SA180 Instructions d'exploitation Page 8