Delta 20-330 Manuel d'instructions télécharger pdf (Page 18)

18 - English

CHANGING BLADES

Disconnect machine from power source.

1. Raise the saw arm to the vertical position and open

the blade wheel cover by releasing stud knob (A)

Fig. 36A and removing screws (H).

2. Release blade tension by turning blade tension

hand knob (B) Fig. 36B.

3. Remove the two finger guards (C) by removing

screws (I).

4. Carefully slip blade (D) off both wheels (E), and

guide assemblies (F).

5. Place the new blade between each of the blade

guide bearings (F) and around both wheels (E).

NOTE: THE TEETH MUST BE POINTING DOWN

ON THE RIGHT HAND SIDE AS SHOWN BY THE

DIRECTIONAL ARROW IN FIG. 31.

6. Replace finger guards (C), and adjust blade tension

by turning hand knob (B).

7. Close the blade wheel cover (J) Fig. 36A.

Fig. 36B

B

E

C

D

TEETH

DIRECTION

F

C

H

A

Fig. 36A

C

I

J

F

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Commentaires sur ces manuels

Pas de commentaire